Our Products


Aluminium Sheets

Aluminium Metal Sheet

Aluminium Metal Sheet

‣ Alloy: 1000 / 3000 / 5000 / 6000 / 7000 / 8000 series.

‣ Condition: Soft (HO), 1/4 Hard (H12,H22), 1/2 Hard (H14, H24), 3/4 Hard (H16, H26), 4/4 Hard (H18, H28, H19)

‣ Sheet Thickness: Min. 0,40 mm / Max. 6,00 mm*

‣ Maximum Sheet Dimensions: Width 2000 mm, Height 6000 mm

‣ Standard Sheet Width: 1000 mm, 1200 mm, 1250 mm, 1500 mm, 2000 mm

‣ Standard Sheet Height: 2000 mm, 2400 mm, 2500 mm, 3000 mm, 4000mm, 6000 mm**

‣ If requested:
      * The thickness of the sheets can be up to 20 mm in alloy metals.
      ** Heights can be adjusted.
      Polythene film can be coated to the sheets.
      Paper can be placed between the sheets.

‣ Standard Sheet Specifications:
- All rolled aluminum sheet and plate products could be made in different alloys and sizes
- Product surfaces which can be embossed depending on the end-use area, which can be produced as completely oil-free or low-oiled
- On-demand, film coating or paper application between sheets
- Compliance with EN, AA or ASTM norms in all processes


Aluminium Rolls

‣ Alloy: 1050, 1200, 3003, 3005, 3105, 5005, 5049, 5754, 5052, 8011 series and certain conditions.

‣ Condition: H12, H22, H14, H24, H16, H26, H18, H28

‣ Sheet Thickness: Min. 0,40 mm / Max. 3,00 mm

‣ Sheet Width: Min. 21 mm / Max. 2150 mm

‣ Roll Inner Diameter: 304 mm, 406 mm, 508 mm

‣ Roll Outer Diameter: Max. 1800 mm

‣ Roll sheets can be produced oily, oil-free, plain or embossed (max 1,00mm).

‣ Standard Roll Specifications:
- All rolled aluminum sheet and plate products could be made in different alloys and sizes
- Product surfaces which can be embossed depending on the end-use area, which can be produced as completely oil-free or low-oiled
- On-demand, film coating or paper application between sheets
- Compliance with EN, AA or ASTM norms in all processes

Aluminium Roll / Sheet

Aluminium Roll / Sheet


Embossed Aluminium Sheets

Embossed Aluminium Sheets

Embossed Aluminium Sheets

‣ Alloy: 1080 / 1070 / 1060 / 1050 / 1200 / 1230 / 1235 / 1100 / 3003 / 3103 / 3105 / 5005 / 8011

‣ Condition: 0,H,111, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38

‣ Sheet Thickness: Min. 0,30 mm / Max. 2,00 mm

‣ Standart Sheet Width: Min. 500 mm / Max. 1280 mm

‣ Standart Sheet Length: Min. 900 mm / Max. 8000 mm


Embossed Aluminium Rolls

Embossed Aluminium Rolls

Embossed Aluminium Rolls

‣ Alloy: 1080 / 1070 / 1060 / 1050 / 1200 / 1230 / 1235 / 1100 / 3003 / 3103 / 3105 / 5005 / 8011

‣ Condition: 0,H,111, H12, H14, H16, H18, H19, H22, H24, H26, H28, H32, H34, H36, H38

‣ Sheet Thickness: Min. 0,30 mm / Max. 2,00 mm

‣ Standart Sheet Width: Min. 40 mm / Max. 1280 mm


Aluminium Checkered Plates

‣ Alloy: 1050 / 3003 series

‣ Condition: H24 / H244 / H114

‣ Surface: Big five bar, small five bar, two bar, three bar or Diamond.

‣ Sheet Thickness: Min. 1,50 mm / Max. 3,00 mm

‣ Sheet Width: Max. 1500 mm

‣ Sheet Height: Min. 1000 mm / Max. 3000 mm

‣ All products can be produced as fully ''oiled''.

‣ Properties of Aluminium Checkered Sheets: 

- Water effusion, easy cleaning and maintenance,
- Resistant to corrosion and outside factors,
- Different surface options,
- EN, AA and ASTM certified production.

‣ Areas of usage: floors, stairs, slippery surfaces, trucks and trailers, automobile and boat accesories, decorative, lighting, printing.

Aluminium Checkered Plate - Five Bar

Aluminium Checkered Plate - Five Bar

Aluminium Checkered Plate - Diamond

Aluminium Checkered Plate - Diamond

Aluminium Checkered Plate - 5 Bar, Diamond, Teardrop

Aluminium Checkered Plate - 5 Bar, Diamond, Teardrop


Aluminium Trapeze

Aluminium Trapeze

Aluminium Trapeze

‣ Alloy: 1000 / 3000 series

‣ Condition: H18

‣ Sheet Thickness: Min. 0,30 mm / Max. 1,20 mm

‣ Surface:
-
Embossed, Non-embossed, Painted

‣ Trapezes:
-
Long life and durable in roof and facade cladding.
- Trapezes can be produced from aluminum and galvanized sheets in desired lengths and in different color options depending on the tonnage.


Anodized Aluminium

Anodized Aluminium

Anodized Aluminium

‣ Alloy: 5005 / 5754 (Laser)

‣ Sheet Thickness: Min. 0,60 mm / Max. 5.00 mm

‣ Sheet Width: Min. 1000 mm / Max. 1500 mm

‣ Plate Length: Min. 2000 mm / Max. 4000 mm

Anodized coating of aluminum sheets is called anodizing coating by anodic oxidation process, which is made in order to increase the resistance against corrosion and corrosion resistance.

Aluminum sheets are used in many areas by anodizing coating, thus gaining more decorative and stainless steel.

At the same time, the aluminum sheet which is coated with anodizing process hardens. Each alloy has anodizing coating capabilities according to chemical properties.


Painted Aluminium and Aluminium Rolls

‣ Alloy: 1xxx, 3xxx, 5xxx series aluminum plates can be painted in accordance with your requests with the most suitable qualities according to your demands.

‣ Condition: H0, H12, H14, H16, H18, H22, H24, H26, H28

‣ Sheet Thickness: Min. 0.20 mm / Max. 3.00 mm

‣ Usage areas:
-
Sandwich panels,
- Trapeze,
- Seam Roof,
- Composite panel,
- Suspended Ceiling,
- Mosque Dome,
- Blinds,
- Garage Door,
- Billboard,
- Signboards

Click for RAL Color Catalog.


Coloured Aluminium Trapeze

‣ Alloy: 3003 / 3105 series

‣ Condition: H18

‣ Properties of Aluminium Trapeze: 
- Long-term toughness,
- Resistance to severe weather conditions,
- Resistance to corrosion, oil, acid or sun-shine,
- More resistance to to corrosion, oil, acid or sun-shine with the coloured option.

Coloured Aluminium Trapeze

Coloured Aluminium Trapeze

‣ Areas of usage: 
- Rooftops of houses, administrative and industrial buildings
- Rooftops and walls, garage doors, barriers, isolation of silos.

Click for RAL Color Catalog.


Galvanized Sheets

Galvanized Sheet

Galvanized Sheet

‣ It is the length of the rolled sheet according to customer requirements.

‣ Sheet Thickness: 0,40 mm - 3,00 mm

‣ Standard Sheet Width: 1000 mm, 1200 mm, 1250 mm, 1500 mm

‣ Standard Sheet Height: 2000 mm, 2400 mm, 2500 mm, 3000 mm

‣ Zinc plating is done according to Turkish and World standards.


Galvanized Rolls

Galvanized Roll

Galvanized Roll

‣ Sheet Thickness: 0,25 mm - 3,00 mm

‣  Roll Weight: Min. 2 tonnes

‣ Roll Width: Max. 1500 mm

‣ Roll Inner Diameter: 508 mm / 610 mm

‣ Zinc Plating Thinkness: 100 - 350 gr/m2

‣ Zinc plating is done according to Turkish and World standards.


Galvanized Sinusoid Sheets (Rolling Door and Garage Door Shutters)

Galvanized Sinusoid Sheets (Rolling Door and Garage Door Shutters)

Galvanized Sinusoid Sheets (Rolling Door and Garage Door Shutters)

‣ Sheet Thickness: Min. 0,30mm / Max. 0,70mm

‣ Sheet Height: Min. 1000mm / Max. 3200mm

‣ Sheet Useful Area Width: 804mm (Tolerance: + 25mm, -15mm)

‣ Usage areas:
- In shop and store buildings,
- Shutters and blinds,
- Used in decorative roof and facade coatings.

‣ Zinc plating is done according to Turkish and World standards.


Coloured Galvanized Sheets and Rolls

‣ Sheet Thickness: 0,30 mm - 1,00 mm

‣  Roll Weight: Min. 500 kg, Max. 25 ton

‣ Roll Width: Max. 1500 mm

‣ Roll Inner Diameter: 508 mm / 610 mm

‣ Zinc Plating Thinkness: 100 - 350 gr/m2

‣ Zinc plating is done according to Turkish and World standards.

The base cold sheet properties and the amount of galvanizing to be coated can be selected by the customer as specified in the standards.

Zinc, Pre-Coating and RAL paint application of painted sheet

Zinc, Pre-Coating and RAL paint application of painted sheet

Paint application is standard in the form of 5 micron primer and 20 micron polyester on the top coat, 7-8 micron epoxy polyester or epoxy back-coat suitable for the end coat and bottom surface.

‣ Paint Coating Selection:
- Color selections are made by determining paint codes from the RAL catalog determined by the international RAL institute.
- Due to the difficulty of applying some colours, please contact us to obtain quality results.

Click for RAL Color Catalog.


Painted Trapeze Plate

Painted Trapeze Plate

Painted Trapeze Plate

‣ 27/200 Form: It is the form of galvanized and painted coils as trapezoidal sheets.

      Sheet Thickness: Min. 0.30 mm / Max. 1.00 mm

      Sheet Height: Min. 600 mm / 16000 mm

      Sheet Useful Area Width: 800 mm and 1000 mm (Tol. ±15mm)

‣ 38/151 Form:

      Sheet Thickness: Min. 0.50 mm / Max. 1.20 mm

      Sheet Height: Min. 600 mm / 16000 mm

      Sheet Useful Area Width: 906 (Tol. ±15mm)

Click for RAL Color Catalog.


Prepainted Trapezoid Sheets

Prepainted Trapezoid Sheets

Prepainted Trapezoid Sheets

‣ 12/121 Form: 

      Sheet Thickness: Min. 0.25 mm / Max. 0.50 mm

      Sheet Height: Min. 1000 mm / 13500 mm

      Sheet Useful Area Width: 847 mm (Tol. ±15mm)

‣ 27/200 Form:

      Sheet Thickness: Min. 0.30 mm / Max. 1.00 mm

      Sheet Height: Min. 600 mm / 1600 mm

      Sheet Useful Area Width: 800 mm ve 1000 mm (Tol. ±15mm)

‣ 38/151 Form:

      Sheet Thickness: Min. 0,50 mm / Max. 1,20 mm

      Sheet Height: Min. 600 mm / 1600 mm

      Sheet Useful Area Width: 906 mm (Tol. ±15mm)

‣ 54/305 Form:
      -
It is the form of galvanized rolls as trapezoidal sheets in Roll Form machine.
      - Produced from 1200 mm sheet.
      - Used as composite floor panel under concrete.
      - Can be produced in desired length.
      - Work area for construction, workers and other materials placed on steel beams during construction.
      - It acts as a mold for concrete and eliminates this cost.
      - Compared to concrete slabs of the same thickness, it is light, load bearing is high and provides concrete saving.

      Sheet Thickness: Min. 0,60 mm / Max. 1,50 mm

      Sheet Height: Min. 600 mm / 1600 mm

      Sheet Useful Area Width: 915 mm (Tol. ±15mm)

‣ Areas of usage: Prefabricated construction, covering of rooftops, construction of sheds, silo and warehouse constructions, rooftops and walls and decorations.

‣ Areas of usage: Pre-painted trapezoid sheets can be produced with 38µm film coating.


Galvanized Corrugated Sheets

Galvanized Corrugated Sheets

Galvanized Corrugated Sheets

‣18/76,2 Form: It is the form of galvanized coils as corrugated sheets.

‣ Sheet Thickness: Min. 0,30 mm / Max. 1,00 mm

‣ Sheet Height: Min. 600 mm / Max. 6000 mm

‣ Sheet Useful Area: 838 mm (Tol. +25 mm, - 15 mm)

‣ Zinc plating is done according to Turkish and World standards.


Painted Galvanized Corrugated Sheets

Painted Galvanized Corrugated Sheet

Painted Galvanized Corrugated Sheet

‣18/76,2 Form: It is the form of galvanized coils as corrugated sheets.

‣ Sheet Thickness: Min. 0,30 mm / Max. 1,00 mm

‣ Sheet Height: Min. 600 mm / Max. 6000 mm

‣ Sheet Useful Area: 838 mm (Tol. +25 mm, - 15 mm)

‣ Zinc plating is done according to Turkish and World standards.

Click for RAL Color Catalog.


Stainless Steel Sheet & Coil

Stainless Steel Sheet & Coil

Stainless Steel Sheet & Coil

‣ ASTM Code: 304, 304L, 321, 316, 316L, 316Ti, 309S, 310, 310S, 430, 439, 409L, 430J1L


DKP Sheet

DKP Sheet

DKP Sheet

‣ Cold Rolling, Quality 1110 - 6112

‣ Sheet Thickness: Min. 0,50 mm / Max. 2,00 mm

‣ Sheet Height: Min. 600 mm / Max. 6000 mm

‣ Sheet Width: Max. 1500 mm


Black Sheet

Black Sheet

Black Sheet

‣ Hot Rolling, Quality 3237

‣ Sheet Thickness: Min. 1,50 mm / Max. 20,00 mm

‣ Sheet Height: Min. 600 mm / Max. 6000 mm

‣ Sheet Width: Max. 1500 mm


HRP Sheet

HRP Sheet

HRP Sheet

‣ Hot Rolls Suitable for Cold Forming, Quality 6222, 6223, 6224, 3237

‣ Plate Thickness: Min. 1.50 mm / Max. 15.00 mm

‣ Sheet Width: Max. 1500 mm

‣ Sheet Lengths: Min. 700 mm / Max. 6000 mm